MM THERMO ELECTRIC MOTOR COOLER

A Thermo-Electric motor cooler is actually a heat pump which cools the temperature of R/C Motors using a Peltier effect. When a 12V DC current is applied to the module, heat transfers from one side of the thermoelectric module to the other.

The cold side is attached to the heat sink. Put your TMC on your motor before you start, the TMC will reduce the temperature of your motor almost to sub-zero temperatures. The prototype of TMC was tested by World champions - Marc Rheinard and Surikarn Chaidajsuriya at the 2005 TITC race in Thailand.

Under extremely hot weather condition (the temperature of the track surface was over 60deg.C) the TMC delayed their motor's heating. As a result, their motors were free from the usual problems.

Specifications
• Size 52x58x72mm
• Weight 178g
• Amp draw 3.0~3.8A
• Input 3.0~3.8A
• 3 colors/colours of choice Black, Blue, Purple
• 1.Only place the TMC on your motor before or after a run. Make sure the TMC is securely fitted to your motor.
• 2.Connect the TMC to a DC12V power supply. (Black to minus-, Red to plus+)
• 3.Let your motor cool down for 5 min.
• 4.Disconnnect the TMC from the power supply and motor.